Expert Answers about Tesla Ski and Snowboard Racks
- How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side Rails
- So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis.
For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories.
For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
view full answer... - Will Rhino-Rack Ski and Snowboard Carrier Fit Exposed Racks Crossbars on Jeep Wrangler
- The Rhino-Rack Ski and Snowboard Carrier # RR573 will fit your Exposed Racks Roof Rack crossbars. The reason the # HD-FK1 adapter is required for the square Rhino-Rack bars like # RB1375B-2 is because of their 1-7/8" height. The Exposed Racks crossbars are only 1-1/4" x 1-1/4" so you won't have a problem installing the ski/snowboard carrier.
view full answer... - Correct Replacement T-Bolt for a Thule SnowPack Ski and Snowboard Carrier
- If you have the Thule SnowPack # TH7324 or # TH7326 then you can use the Replacement M6 x 55mm T Bolt for Thule SnowPack Ski and Snowboard Carrier # 1500052620 to attach to your crossbars.
However, If you have a different Thule ski rack feel free to let me know what you have and I can check and see if we have the correct hardware.
view full answer... - Recommended Accessory Bars to Attach a Rhino-Rack Ski Carrier to a Pioneer Platform
- Sounds like you have a Pioneer Platform. To attach the Rhino-Rack Ski and Snowboard Carrier item # RR574 to it you will need either the 53" long item # RR43138B depending on what size your Pioneer Platform is.
My email is included below if you want to send me a picture.
view full answer... - Mounting Bolt Size for the Rhino-Rack Ski and Snowboard Carrier
- Hey Greg, you're looking for the Replacement M6 x 32 mm Button Security Screw for Rhino-Rack Accessories # RR33UB. You're also going to need the flat washers # RR63TB and the M6 nuts # RR69TB as well.
view full answer... - Video to Use for Removing and Installing New Rhino Rack Lock Cores
- Hey Scott, if you check out the attached video on this page you'll see our installer walk you through how to remove Rhino Rack lock cores so that you can install new ones.
view full answer... - Mounting Hardware for Thule Flat Top 853-2805
- The SpeedLink will not fit your older Thule Flat Top without making modifications which we do not recommend. If you need replacement hardware you can use the # 7533998. If you have crossbars with channels you can also use the Thule XADAPT2 # Xadapt2.
view full answer... - Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee Laredo
- I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier # RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure.
Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
view full answer... - How to Tell if Yakima FatCat EVO Fit T-Slots of Tesla Model Y
- Hey Leland; thanks for the question and let's start with the accessory you were mentioning, which is the Crossbar SmarT-Slot Kit 2 for Yakima FatCat Ski and Snowboard Carriers # Y03098. This is what is needed to add the T-bolts to both the Yakima FatCat EVO 4 # Y03095 and EVO 6 # Y03096.
That said, I don't know the exact T-slot dimensions of the Tesla Model Y's crossbars. You'll have to measure the T-slots, and I can tell you the T-bolts of the Yakima kit are 1/4" by 1/4". So you can use...
view full answer... - Individual Clamps for Thule Mounting Kit 7533998
- Hey Michael, thanks for reaching out!
Instead of purchasing the whole Mounting Kit # 7533998 you can just get a single top and bottom piece:
- Top # 853-5267
- Bottom # 753-2854
If you need the hardware as well then I recommend just getting the set of 4 because you'll be getting much more for your money. Thule likes to sell things in bulk so when you start piecing things out it can get a little pricey.
view full answer... - Replacement Knob for Thule Flat Top Ski Carrier 725
- The OEM replacement for the knob on your Thule 725 ski rack is the Replacement Thule 2-Wing Knob # 753-1897-03. The Replacement 3-Wing Hand Knob # 753-0745 you referenced will fit since it works with M6 bolts but the 2-wing knob is the direct replacement.
view full answer... - Can The Rhino-Rack Ski and Fishing Rod Carrier # RR572 Attach to T-Slots On Yakima HD Crossbars?
- Yes, the Rhino-Rack Ski and Fishing Rod Carrier # RR572 will allow you to mount to the T-slots on your Yakima HD crossbars. It does come with this hardware as the same bolts are used to hold on the universal clamps that will slide into the t-slots.
To secure your other cargo we do have the Eye Bolts # Y01162 you can use to tie off into.
view full answer... - All Other Inquiries
- I wish we could help but that's not a replacement key we can get at this time.
view full answer... - Recommended Roof Rack for a 2019 Subaru Outback Wagon w/ Raised Factory Rails
- Yes, they will! The Malone AirFlow2 Roof Rack item # MAL84AR will attach directly to the raised rails on your 2019 Subaru Outback Wagon. These measure 58" long x 3" wide x 1" tall and have a 165 lbs capacity.
view full answer... - Will The Yakima Replacement Mounting Hardware # Y886004 Fit a 2013 Toyota Sequoia Factory Roof Rack?
- The Replacement Mounting Hardware # Y8860040 will fit a crossbar up to 3-7/8" wide and 1-1/4" tall. As I do not have access to the size information of the factory crossbars on your 2013 Toyota Sequoia you would need to take this measurement. I do know these will fit on the Yakima PowderHound, Big PowderHound, ButtonDown Aero, and FreshSesh racks. If you can tell me which rack you have I can verify with Yakima the fitment.
view full answer... - Can SeaSucker Roof Rack Bars For Mazda Miata Hardtop be Close Together
- Hi Gerhard,
You can put the crossbars close together on your Mazda Miata when using the SeaSucker Monkey Bars Roof Rack # 298-SX6000B.
That said, the correct distance apart is going to depend on the carrier. We don't offer a windsurf board carrier for the width you need, but carriers will have a specific distance apart required for their use. So the crossbars can be close or far, but the carrier determines the right distance, and if the board is angled upwards, yes that will create a...
view full answer... - Can The Yakima Rack And Roll Trailer Be Backed Into Water To Launch A Kayak
- Hey Drew,
Yakima does not recommend backing the Yakima Rack and Roll Trailer # Y08107 into the water because the bearings are sealed and water could end up ruining the hubs. This trailer is more so designed just for getting your kayaks/accessories to your destination and not intended for use launching your kayaks.
The Malone kayak trailers you mentioned are marine-grade and would be capable of being backed into the water to easily launch and recover your kayaks. We offer a crossbar-style...
view full answer...
Go To Results